Pancake Art

I have been wanting to try this for months and just now am trying it. I am going to attempt Watermelon Pancakes!!! The directions are a little extensive but it is VERY simple. Thanks Jenni Price for the inspiration! http://jennipriceillustration.blogspot.com/

Griddle or large skillet
Pam Cooking Spray
Large mixing bowl
Water
Krusteaz Buttermilk Pancake Mix (the just add water mix)
Electric mixer
Three Condiment Squirt Bottles (can be found at Walmart)
red and green food coloring
Paper Towels
Spatula
Spoons for mixing
Miniature chocolate chips
Measuring Cup
Toothpicks
Mixing cups

Get out your large bowl and stir with a spoon 1 cup plus 2 Tbsp of pancake mix with ¾ cup of water.
You want your batter thick enough to “draw” with but not too much where it won’t squeeze out of the
squirt bottle (you can add more pancake mix if it's too runny). Grab your electric mixer and stir until
it's well blended. If you have too many lumps, they will clog up your squirt bottle. Divide up your
batter into three bowls. Refer to the above squirt bottle graphic for a rough idea on how much pancake
batter should be in each squirt bottle. I didnt use as much as they said to use for the food coloring. The green color needs 6 drops of food coloring, the red needs 13
drops of food coloring and the white doesn't have any coloring in it. Pour the batter slowly into the
squirt bottles making sure to keep paper towels handy for any drips.

Spray your griddle with cooking spray but do not turn it on yet. Keep toothpicks nearby to release any
clogs in the squirt bottles.

Step One: For the wide slice, draw the Watermelon rind with the green batter. Because these are so
small, I suggest making several of them at the same time.

Step Two: Draw a second watermelon rind line with the white batter.

Step Three: Draw the watermelon top with the red batter.

Step Four: For the watermelon wedge, draw the rind with the green batter. Again, since these are so
small, I suggest making several of them at the same time.

Step Five: Draw a second rind line with the white batter.

Step Six: Complete the watermelon wedge shape with the red batter.

Step Seven and Eight: Turn on your griddle to the lowest heat setting (about 200 degrees) and let
the outlines cook. Wait until they seemed puffed up before continuing. These cooked outlines keep the
batter from spreading out so that the shape stays in place. Now turn off your griddle.

Step Nine: Fill in the wedge with the red batter. Turn your griddle back on to 200 degrees and wait

to flip it until the pancake looks bubbly and loses most of it's shine.

Step Ten: Fill in the watermelon wide slice with the red batter and wait to flip it until the batter is

bubbly and looks mostly cooked. If you plan on making more watermelons, turn off your griddle and

start at step one again but wipe down your griddle with a paper towel and re-spray your griddle with

cooking spray when it has cooled slightly.

Step Eleven : Let the mini watermelons cool a little bit then decorate with mini chocolate chips.

These are mine!!!

Mickey Mouse Pinata

So for Liams 1st Birthday I had thought about doing a Mickey theme but then decided on a Jungle theme instead. When I was throwing ideas around I made this Mickey Pinata. Now it is hanging above Liams bed instead! Here is how to make it!!

 

What I used:

A Costco sized Huggies box.

tape

craft glue

a roll of crepe paper

a couple sheets of tissue paper

tape

 

I started by cutting out the mouse ears shape. I used bowls for my drawing. You'll need two sets of ears, a front and a back.

Next I cut the flaps from the top and bottom of the box in half lengthwise. I took the strips and made them pliable by bending them and rubbing them along the edge of the table. It's kinda like curly ribbon. You just have to break the stiffness so you can bend it around the shape of the ears.

I attached the strips one side at a time. I started at the center corner of one ear and taped it into place. Then running along the edge I would place a piece of tape every now and then. You don't want to tape the whole thing or they won't be able to break it open, use just enough to hold it in place. I continued this until I wrapped around the whole thing. Taping in all the corners help it hold it's shape.

I turned it over and attached the other side the same way.

I left this gap in the top so I could fill it with candy.

I didn't get a picture, but at this point I would poke a hole in the front and back to fish your wire through. Once you've added the wire you can cover the box with paper.

I started at the edges. I ran lines of glue along the edges on both the top and side of the pinata. Next I covered them up with the crepe paper.

I did this on both sides

Then I covered the entire thing with a layer of black tissue paper. I glued it down and cut away the excess.

I covered the tissue paper with spirals of ruffled crepe paper. I started with the ears first.

First I went around the edge with the glue. Then I pulled the crepe paper into gathers as I layed it down. I would lay it in the glue and scrunch it up.

Once the outer layer was done I would start on the next layer making sure they overlapped a little.

 

After the ears were done, I did the same thing for the center. I covered both the front and back and sides with the crepe paper gathers.

For the sides I did the edges first then did a ruffle down the middle.

The only thing left to do is add a bow...or not depending if you want Mickey or Minnie, it can be used to hide the wire.

For the middle of the circle I scrunched a strip of the crepe paper into gathers and formed it into a circle and attached it to the center.